International Truck VIN Decoder: Navistar VIN Codes

International truck VIN decoder: Navistar WMIs like 1HT, 1HS, 2HS and 3HS, the model, engine and GVWR positions, plant codes and where the VIN is on the cab.

An International truck VIN decoder reads the 17-character VIN on an International or Navistar truck and returns the model, axle setup, engine, GVWR class, brake type, model year and assembly plant. Enter the VIN in our free VIN decoder and it pulls those details from the filings International made with NHTSA.

A Navistar VIN decoder is the same thing. Navistar, the company behind International trucks, renamed itself International Motors, LLC on October 1, 2024, and NHTSA's vPIC database now lists most of the US and Mexican manufacturer codes under the new name.

This guide shows what each position means, so you can check a truck listing, a title or an auction sheet by hand. Every code comes from NHTSA's vPIC database, which we queried in November 2026 by building check-digit-valid sample VINs on International patterns and decoding them. The sample VINs are illustrations, not real trucks.

An International truck VIN, decoded

Take the sample VIN 3HSDZAPR3KN100001. vPIC decodes it cleanly as a 2019 International LT625 truck-tractor.

PositionSampleWhat it means on an International truck
1–33HSWorld manufacturer identifier (WMI): International Motors, LLC, Mexico, truck
4–5DZModel and axle setup: LT625, 6x4
6–7APEngine: Cummins X15
8RGVWR Class 8 (33,001 lb and above) with air brakes
93Check digit
10KModel year (K = 2019)
11NAssembly plant (N = Escobedo, Mexico)
12–17100001Production sequence number

The layout follows the federal VIN rule, 49 CFR Part 565. For a truck, positions 4–8 must make the model or line, series, chassis, cab type, engine type, brake system and gross vehicle weight rating decipherable. The rule lets each manufacturer decide which character holds which attribute, so International's layout is its own. Our guide on how to read a VIN covers the parts every brand shares.

Positions 1–3: International and Navistar WMI codes

The first character is the country: 1 for the United States, 2 for Canada and 3 for Mexico. The third character tells you the vehicle type. On International codes, S and P are complete trucks, while T, V and A are incomplete vehicles: a chassis cab or bus chassis that leaves the factory without a body.

These are the WMIs vPIC lists for International, Navistar and IC Bus:

WMIManufacturer in vPICCountryVehicle type
1HS, 1HPInternational Motors, LLCUnited StatesTruck
1HT, 1HV, 1HAInternational Motors, LLCUnited StatesIncomplete vehicle
2HS, 2HPNavistar Canada, Inc.CanadaTruck
2HT, 2HVNavistar Canada, Inc.CanadaIncomplete vehicle
3HS, 3HRInternational Motors, LLCMexicoTruck
3HT, 3HVInternational Motors, LLCMexicoIncomplete vehicle
3HCBlue Diamond Truck, S. de R.L. de C.V.MexicoTruck
3HABlue Diamond Truck, S. de R.L. de C.V.MexicoIncomplete vehicle
4DRIC Bus, LLCUnited StatesBus
7NANavistar Defense, LLCUnited StatesTruck

Three details help when a decode looks odd:

  • Tractors and straight trucks use different codes. Every highway tractor we decoded (LT, ProStar, LoneStar, 9400i, 8600) used an HS code. The medium-duty 4300, 4400, 4700 and MV samples and the vocational WorkStar samples used 1HT, 3HT or 3HA, because they are sold as chassis for a body builder to finish.
  • 1HT is not always an International. vPIC lists Chevrolet and GM alongside International under 1HT. Our sample 1HTKHPVK0LH100001 decoded as a 2020 Chevrolet Silverado medium-duty chassis cab, Class 5, built in Springfield, Ohio, with International Motors as the manufacturer.
  • 1HV covers bus chassis. Our sample 1HVBBAAN14H100001 decoded as a 2004 International 3800 school bus chassis.

If a truck VIN starts with none of these, it is not an International. A trailer pulled by the truck has its own VIN and its own maker; see our trailer VIN decoder guide for those.

Positions 4–8: model, engine, GVWR and brakes

International splits the five descriptor characters into three groups. We confirmed the split by changing one character at a time in a sample VIN and decoding each version in vPIC.

Positions 4–5: model and axle setup

Positions 4–5Model in vPICAxlesSample (WMI, year)
DZLT6256x43HS, 2019–2025
DYLT6254x23HS, 2019
DWRH6136x43HS, 2019
DXRH6134x23HS, 2019
CXLoneStar6x43HS, 2019
DJProStar+6x41HS 2012, 3HS 2013
CUProStar6x42HS 2008, 3HS 2009
CN9400i6x42HS, 2007
HXTranStar 86006x41HS, 2007
EUMV6074x21HT 2019, 3HA 2022
EKHV6076x43HA, 2024
MMDuraStar 43004x21HT 2012, 3HT 2008
MK44004x21HT, 2005
WGWorkStar 74006x41HT, 2007
WYWorkStar 76006x41HT, 2009
SC47004x21HT, 2000
SD49004x21HT, 2001

The second character often separates versions of the same truck. On the 2019 LT pattern, DZ decoded as a 6x4 and DY as a 4x2.

Positions 6–7: engine

International uses two characters for the engine. Read them as a pair, because the same 7th character means different engines after a different 6th character.

Positions 6–7Engine in vPICSamples
APCummins ISX, later X15ProStar 2008–2012, LT and LoneStar 2019–2025
TZInternational A26LT625, 2022
SJInternational MaxxForce 13ProStar+, 2013
AHCummins ISMTranStar 8600, 2007
SBCaterpillar C-13TranStar 8600 2008, WorkStar 7600 2009
AAInternational DT466 / MaxxForce DT4300, 4400, 4700, 4900 and WorkStar 7400, 2000–2012
MMCummins B6.7MV607, 2019
TACummins L9MV607 2022, HV607 2024

This is the pair to check when a listing says "Cummins" and the seller is vague about which one. An AP truck left the factory with a 15-litre Cummins. A different pair means a different engine, or an ad that has it wrong.

Position 8: GVWR class and brake type

The 8th character combines the weight class with the brake system. These are the codes vPIC returned on our sample pattern:

8th characterGVWR classBrakes
JClass 5: 16,001–19,500 lbAir
KClass 5: 16,001–19,500 lbHydraulic
LClass 6: 19,501–26,000 lbAir
MClass 6: 19,501–26,000 lbHydraulic
NClass 7: 26,001–33,000 lbAir
PClass 7: 26,001–33,000 lbHydraulic
R, TClass 8: 33,001 lb and aboveAir
S, UClass 8: 33,001 lb and aboveHydraulic

One character can move the same cab into another class. A 4300 with L or M is a Class 6 truck rated at 26,000 lb or less, while N puts it in Class 7. Confirm the exact rating on the door label, since the VIN gives only the class range.

Mechanic shining a flashlight on the data label in the door frame of a medium-duty truck to read its VIN

Position 10: model year

The 10th character is the model year, using the same codes as every other vehicle. In our samples, Y decoded as 2000, 1 as 2001, 7 as 2007, 8 as 2008, C as 2012, K as 2019, N as 2022, R as 2024 and S as 2025. The full list is in our VIN year chart.

The codes repeat every 30 years, and heavy trucks lack the usual tiebreaker. On cars and light trucks, Part 565 makes position 7 a letter from 2010 on and a digit before that. That rule covers trucks only up to 10,000 lb GVWR. On an International, position 7 is part of the engine code, and it was a letter on both our 2007 and 2019 samples. If a decoder returns a year that looks 30 years off, the build date on the door label and the title settle it.

One more heavy-truck difference: only the last four characters must be numbers, not the last five.

Position 11: International plant codes

11th characterPlantSamples we decoded
HSpringfield, Ohio4300, 4400, 4700, 4900, MV607, 3800 bus chassis
JGarland, TexasTranStar 8600, WorkStar 7400 and 7600, ProStar+ (2012)
CChatham, Ontario9400i (2007), ProStar (2008)
NEscobedo, Nuevo León, MexicoLT625, LoneStar, ProStar, DuraStar 4300
LEscobedo, MexicoMV607 (2022), HV607 (2024), DuraStar 4300 (2012)

vPIC also returned Tulsa, Oklahoma, for B and E, and San Antonio, Texas, for S on a 2022 pattern when we changed only the plant character. We did not have a full sample pattern for those plants, so decode the whole VIN before relying on them.

Where the VIN is on an International truck

Do not look for a plate behind the windshield first. 49 CFR 565.13 requires a VIN readable through the glass only on cars, SUVs and trucks of 10,000 lb GVWR or less. Every International model in this guide is heavier than that.

The regulated location is the certification label. Under 49 CFR 567.4, it must be fixed to one of these places, in this order of preference:

  1. The hinge pillar, the door-latch post or the door edge that meets the latch post, next to the driver's seat.
  2. The left side of the instrument panel, if none of those is practical.
  3. The inward-facing surface of the driver's door, if the instrument panel is not practical either.

The label shows the VIN, the month and year of manufacture, the GVWR and the axle ratings. On a chassis cab (1HT, 2HT, 3HT, 3HA), expect more than one label. Section 567.5 requires the incomplete-vehicle maker to label the chassis, and the company that added the dump body, box or bus body certifies the finished vehicle with its own label. Both should carry the same VIN.

The VIN is also on the title and registration. Many heavy trucks carry a stamped VIN on the frame as well, but we could not find an official International document that gives its position, so ask an International dealer if the door label is missing or unreadable. Our guide to where the VIN number is covers the other vehicle types.

Pre-1981 International Harvester serial numbers

A 17-character decoder will not read an International Harvester truck from the 1970s or earlier. NHTSA says its vPIC decoder "is intended for use on Model Years 1981 and forward," and the federal year-code table starts at 1980. Older trucks carry shorter serial numbers that were never built to the 17-character format, so the check digit test does not apply to them.

We did not find an official published key for those serial numbers, so this guide does not list one. For a pre-1981 truck, work from the title and the data plate on the truck, and ask a dealer or a marque club to help identify it. A failed decode on a truck that old is expected and is not a sign of tampering.

Recall check and used-truck checklist

Commercial trucks get safety recalls too. NHTSA's recall data listed 18 campaigns for the 2019 International LT when we checked in November 2026, covering air brakes, a seat belt anchorage, the engine and battery cables among other parts. Each campaign covers only certain VINs, so run the truck's own VIN through the NHTSA recall lookup. Our recall check by VIN guide explains how to read the result.

Before you buy a used International:

  1. Read the VIN from the door label, not the listing, and compare it with the title.
  2. Decode it with our free VIN decoder. A failed check digit points to a misread or altered VIN; our VIN check digit guide explains why.
  3. Match positions 4–8 to the truck. The model, axle setup, engine and brake type in the decode should be what is parked in front of you. A different engine means a swap, and you should ask for the paperwork.
  4. Run the recall lookup, then check theft and title records with a free VIN check.

Frequently asked questions

How do I decode an International truck VIN?

Enter all 17 characters in a decoder that reads NHTSA's vPIC data. Positions 1–3 are the manufacturer, 4–5 the model and axle setup, 6–7 the engine, 8 the GVWR class and brake type, 9 the check digit, 10 the model year, 11 the plant and 12–17 the serial number.

Is a Navistar VIN the same as an International VIN?

Yes. Navistar built International trucks, and the company renamed itself International Motors, LLC in October 2024. NHTSA's vPIC database lists Navistar, International and IC Bus as makes under the same manufacturer codes, such as 1HT, 1HS, 2HS and 3HS.

What does 1HT mean on a truck VIN?

1HT is a US manufacturer code that NHTSA lists under International Motors, LLC for incomplete vehicles, meaning a chassis cab that another company finishes with a body. Our 4300, 4700 and MV samples all started with 1HT. vPIC also lists Chevrolet under 1HT, and one 2020 sample decoded as a Chevrolet Silverado medium-duty chassis cab built in Springfield, Ohio.

Which digit of an International VIN is the engine?

Positions 6 and 7 together. On the samples we decoded in vPIC, AP was a Cummins ISX or X15, AA an International DT466 or MaxxForce DT, SJ a MaxxForce 13, TZ an International A26 and TA a Cummins L9. The 8th character is the GVWR class and brake type, not the engine.

Where is the VIN on an International truck?

Start with the certification label by the driver's door: on the hinge pillar, the door-latch post or the door edge. Federal rules allow the left side of the instrument panel or the inside of the driver's door if those spots are not practical. Trucks over 10,000 lb GVWR are not required to have a VIN plate visible through the windshield.

Sources & official references

  1. NHTSA vPIC APIvpic.nhtsa.dot.gov

    DecodeWMI and DecodeVINValuesBatch endpoints: source of every WMI, model, engine, GVWR, brake and plant code in this guide, queried November 2026

  2. NHTSA vPIC: WMIs registered to Navistarvpic.nhtsa.dot.gov

    Navistar Canada and Navistar Defense manufacturer codes

  3. NHTSA vPIC: Product Information Catalog and Vehicle Listingvpic.nhtsa.dot.gov

    States vPIC is intended for model years 1981 and forward

  4. 49 CFR Part 565: Vehicle Identification Number requirements (eCFR)ecfr.gov

    Truck attributes required in positions 4–8, model year codes, windshield rule limited to 10,000 lb GVWR, last four characters numeric on heavy trucks

  5. 49 CFR Part 567: Certification (eCFR)ecfr.gov

    Location of the certification label (567.4) and labels on vehicles built in two or more stages (567.5)

  6. Navistar announces rebrand and name change to Internationalnews.international.com

    Company press release, September 25, 2024: Navistar, Inc. becomes International Motors, LLC effective October 1, 2024

  7. NHTSA recall lookupnhtsa.gov

    Recall lookup by VIN; NHTSA's recall data listed 18 campaigns for the 2019 International LT in November 2026